DYL4 AC Charging Interface

Product Introduction

• This series of products are mainly designed for single phase AC charging for electric cars and electro mobiles. (Household 220V is good for charging). It is currently used for common charging mode.

• The product uses crown spring, muti-contacting points, to ensure its high sensitive reliability of contacting. It is really simple to plug & unplug, in addition to that, it has high load capacity.

• The product uses safe structure design; by connecting to the ground, the contacting devices and the power contacting devices are well protected.

• The product has 3 cores. Two cores are for power contact, one core is for ground to protecting the contacts.

• The product has its special device, mechanical locking. It prevents the potential safety hazard from accidental separation of a charging gun.

• Wiring type is pressure welding or welding.

• It has indication when it is under charging. (at the plug side)

Technical Performance

Environmental Stress Resistance

• Operating temperature: -40℃-+125℃

• Inflaming retarding level: UL94-V0

• Relative humidity: +40℃，95%HR

Mechanical Performance

• Mechanical life: ≥5000 times（highest 10000 times）

• Vibration: 10Hz-2000Hz，Acceleration 196m/s²，Current transient breaking ≤1μs

• Impact: Acceleration 50g，half sine wave，lasting time 11ms，Current transient breaking≤1μs

Electrical Performance

• Rated current: 80 A

• Medium withstand voltage: power contact 2500V, AC sea level

• Insulation resistance: ≥5000MΩ