Availability: | |
---|---|
Quantity: | |
Product Introduction
This series of printed circuit connector has plug and outlet; the plug is defined as device contains positive guiding or negative locking connector; Outlet is defined as device contains negative guiding or positive locking connector; plug and outlet are determined by the combination of the accessories.
Number of cores: 17, 29, 41, 53, 65, 72, 84, 96
The terminating style at connector’s tail side is straight plug printed board, angle plug printed board, welding style, and pressure welding style; The cross sectional area for pressure welding products is 0.15 mm2 ~0.25mm2 .
Product Characteristics
It meets the criterion of GJB1438 and MIL-C-55302
Contact style is spring wire socket and rigid contact pin; low plugging & unplugging force required, high contact reliability, supports hot plug (use as you plug), long usage life, and very durable.
It is flexible to install locking form; it can be installed vertically, horizontally, in a floating manner, screw thread locking, which prevents mis-plugging; fast locking on mis-plugging.
Locator guiding equipment has 36 orientation combinations. It prevents the mis-plug from same specification product.
This series of printed circuit connectors are mainly used for circuit connection among electronic equipment, printed board inside computers, between printed board and wires, between wires and wires.
This series of products meet the enterprise criterion of Q/ZH. J1006《J27A Series Printed Board Circuit Electrical Connector Specification Regulation》.
Main Technical Performance
Environmental temperature: Level I:-55℃~+100℃、Level Ⅱ:-55℃~+125℃、LevelⅢ:-55℃~+175℃
Relative humidity: +40℃, 98%
Low air pressure: 1.33 kPa 150V
Vibration: 10 Hz~2000 Hz ,150 m/s2
Impact: 1000 m/s2
Insulation resistance: ≥5000 MΩ
Medium withstand voltage: 1000V
Mechanical life: 1000 times
Rated current: 3A
Product Specification
When customers are choosing J27A products, one must follow the illustration shown below to choose substrate assembly and accessory to be able to make up for a complete product (plug/outlet